Styropor® BFL 495

About
Products and their uses Styropor BFL 495 low pentane product can be used in a wide variety of applications for shape molding of thin walled parts requiring modified material or high density block molding applications with fine, smooth definition. Description Modified expandable polystyrene (EPS) containing approximately 3.45 – 3.65 wt% pentane as the blowing agent. The BFL 495 is supplied as spherical beads with a bulk density of approximately 40 lbs/ft³ (640 kg/m³).&&

About

Products and their uses Styropor BFL 495 low pentane product can be used in a wide variety of applications for shape molding of thin walled parts requiring modified material or high density block molding applications with fine, smooth definition. Description Modified expandable polystyrene (EPS) containing approximately 3.45 – 3.65 wt% pentane as the blowing agent. The BFL 495 is supplied as spherical beads with a bulk density of approximately 40 lbs/ft³ (640 kg/m³).&&

Product Description
Supplier	BASF
Generic	PS (EPS)
Material Status	Commercial: Active
Features	HF-1
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.0176 to 0.0641	g/cm³
Apparent density	0.64	g/cm³

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HF-1		UL 94

Supplementary information	Nominal value	Unit
Bead diameter	420.0 to 850.0	µm
Material Number	VIII, II, IX
Pre（Puff Age dependent on density）	0.2 to 2.0	day

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.