POLYPRO® SB9108H

About
POLYPRO® SB9108H is a Polypropylene Copolymer (PP Copolymer) material. It is available in Asia Pacific for injection molding. Important attributes of POLYPRO® SB9108H are: Flame Rated RoHS Compliant Copolymer High Gloss High Stiffness Typical applications include: Automotive Electrical/Electronic Applications Food Contact Applications&&

Product Description
Supplier	YUHWA
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,Block Copolymer,HB
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238
Shrinkage rate
MD	1.4 to 1.8	%	Internal Method

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	29	J/m	ASTM D256
25℃	98	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	130	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525
Melting peak temperature	168	℃	ASTM D3418
Relative temperature index
Electrical performance	125	℃	UL 746

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
All colors	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	97		ASTM D785
tensile strength
yield	29.4	MPa	ASTM D638
Tensile strain
fracture	> 200	%	ASTM D638
Bending modulus	1470	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.