| About |
|---|
| Features and Uses: Extrusions, foams, clear film and sheet Calendering Injection molding, Pipe fittings Alloying Solution top coats Flooring&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Foaming performance,Homopolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.50 to 0.59 | g/cm³ | Internal Method |
| K-Value | 59.0 to 60.0 | ||
| pollutant | < 15 | pcs/100 g | Internal Method |
| Intrinsic viscosity | 0.77 to 0.81 | dl/g | Internal Method |
| Particle size | Malvern | ||
| % Retained on Pan | < 6.00 | % | Malvern |
| % Retained on 200 mesh | < 25.0 | % | Malvern |
| % Retained on 40 mesh | < 0.500 | % | Malvern |
| % Retained on 60 mesh | < 4.00 | % | Malvern |
| Gel content | |||
| BEST Test | < 10.0 | Internal Method | |
| Relative viscosity | 1.94 to 2.00 | ||
| colour | |||
| CIE Lab b* Value | 0.50 to 1.4 | Internal Method | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| CAS Number | 9002-86-2 | ||
| Residual monomer | < 1 | ppm | Internal Method |
| volatility | < 0.30 | % | Internal Method |
| Flow time | < 14.0 | sec | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |