Braskem PE BS002W

About
BS002W is a High Density Polyethylene (HDPE), copolymer, that can be used to produce thin walled packages. Offers an outstanding combination of impact resistance and stiffness, excellent stress cracking resistance (ESCR), good reproducibility of the weight of bottles and excellent surface. Applications: Blow molded bottles for cleaning & hygiene and chemicals products. Process: Blow Molding.&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,Food contact compliance,High density,High ESCR
Availabilitys	Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.959	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.33	g/10min	ASTM D1238
190℃，21.6kg	24	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
50 ℃, 2.00 mm, 10% non-ionic surfactant, molded, F50	50.0	hr	ASTM D1693
50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50	150	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, molded	35.0	MPa	ASTM D638
Bending modulus
1% cut, molded	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
Compression Molding	200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, molded	75.0	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.