ALTECH® PP-B ECO 2030/150

About
ALTECH® PP-B ECO 2030/150 is a Polypropylene Copolymer (PP Copolymer) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PP-B ECO 2030/150 include automotive, construction applications and engineering/industrial parts. Characteristics include: Eco-Friendly/Green Flame Rated RoHS Compliant Chemically Coupled&&

About

ALTECH® PP-B ECO 2030/150 is a Polypropylene Copolymer (PP Copolymer) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PP-B ECO 2030/150 include automotive, construction applications and engineering/industrial parts. Characteristics include: Eco-Friendly/Green Flame Rated RoHS Compliant Chemically Coupled&&

Product Description
Supplier	ALBIS
Generic	PP copolymer
Material Status	Commercial: Active
Features	Renewable resources,Chemical coupling
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ISO 1183
Melt Flow Rate	5.0	g/10min	ISO 1133

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
—	10	kJ/m²
-40℃	5.0	kJ/m²
-20℃	6.0	kJ/m²
Charpy Unnotch Impact strength
—	45	kJ/m²
-40℃	30	kJ/m²
-20℃	30	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	120	℃	ISO 75-2/A
Vicat Softening Temp
B50	110	℃	ISO 306
Melting temperature
DSC	165	℃	ISO 11357

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	60.0	MPa	ISO 2039-1
Tensile modulus	4900	MPa	ISO 527-2
tensile strength
yield	65.0	MPa
fracture	60.0	MPa
—	65.0	MPa
Tensile strain
yield	4.0	%
fracture	4.0	%
Bending modulus	4500	MPa	ISO 178
bending strength
3.50% strain	90.0	MPa
—	95.0	MPa

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature
Desiccant desiccant	80 to 120	°C
Hot air dryer	80 to 120	°C
Drying time
Desiccant desiccant	2.0 to 4.0	hr
Hot air dryer	2.0 to 3.0	hr
Processing (melt) temperature	200 to 270	°C
Mold temperature	20 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.