| About |
|---|
| High-viscosity, heat and light stabilized polyamide 12 compound for extrusion. VESTAMID®NRG 3001 is a polyamide 12 compound developed for the manufacturing of hydrocarbon transport piping systems and liners. VESTAMID®NRG 3001 is characterized by easy processing and excellent dimensional control during pipe extrusion, especially by processing of large diameter pipes. The material has an excellent compatibility against hydrocarbons (i.e. crude oil) and oilfield chemicals (i.e. paraffin inhibitors resulting in high dimensional stability and unaffected properties of parts in contact with those.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High Viscosity,Good Dimensional Stability,Solvent resistance |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ISO 1183 |
| Swelling | ASTM D471 | ||
| Crude oil：80℃ | 1.2 | % | ASTM D471 |
| Diesel oil：80℃ | 1.2 | % | ASTM D471 |
| IRM 903：80℃ | 1.2 | % | ASTM D471 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | ||
| — | 1320 | MPa | ISO 527-2 |
| 23℃ | 770 | MPa | ISO 527-2 |
| 40℃ | 441 | MPa | ISO 527-2 |
| 60℃ | 336 | MPa | ISO 527-2 |
| 80℃ | 293 | MPa | ISO 527-2 |
| 100℃ | 259 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 38.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 7.0 | % | ISO 527-2 |
| fracture | > 200 | % | ISO 527-2 |
| Poisson’s ratio | |||
| 23℃ | 0.43 | MPa | ISO 527-1 |
| 100℃ | 0.45 | MPa | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30 ℃, completely fractured | 15 | kJ/m² | ISO 179/1eA |
| 23 ℃, completely fractured | 54 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 176 | ℃ | ISO 11357-3 |
| Linear coefficient of thermal expansion | |||
| MD：23℃ | 1.4E-4 | 1/℃ | ISO 11359-2 |
| Thermal conductivity coefficient | 0.24 | W/m/K | ASTM C177 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 220 to 240 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. after saturation in crude oil |
| 3. 2nd heating |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |