| About |
|---|
| 無規聚丙烯共聚物，高透明性，抗化學藥品性佳，可用于一次性針筒，適用於γ ray 射线消毒 |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | 15 | g/10min | ISO 1133 |
| Density | 0.90 | g/cm³ | ISO 1183 |
| melting point | 146 | ℃ | DSC |
| Yield tensile stress | 280 | Kg/cm 2 | ISO527 |
| Shrinkage rate | 1.3-1.7 | % | FPC Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | 300 | % | ISO527 |
| Rockwell hardness | 98 | R 级 | ISO 2039 |
| Bending modulus | 931.95 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 9 | Kg.cm/cm | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ISO 306 |
| Hot deformation temperature | 95 | ℃ | ISO 75 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |