Ecoflex® 00-35

About
Ecoflex® 00-35 FAST is a soft, fast cure platinum-catalyzed silicone that is versatile and easy to use. Parts A and B are mixed 1:1 by weight or volume, pot life is about 2.5 minutes and rubber cures in about 5 minutes at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and pouring. Rubber cures without a “tacky” surface, is very soft, very strong and very “stretchy”, stretching many times its original size. Ecoflex® 00-35 FAST is off-white translucent and can be color pigmented using Silc Pig® silicone color pigments. Certified Skin Safe – Material is skin safe and certified by an independent laboratory to OECD TG 439. Liquid Ecoflex® 00-35 FAST will cure against the skin and can be used for life casting applications to make rubber molds that cure quickly and are good for casting wax, resins, etc. Ecoflex® 00-35 FAST can also be used for a variety of skin safe applications including making fast skin safe appliances for special effects and cosplay, cushioning for orthopedic and orthotic devices worn on the body and much more. Ecoflex® 00-35 FAST can also be used to make fast cure rubber molds with high elongation for casting a variety of materials.&&

About

Ecoflex® 00-35 FAST is a soft, fast cure platinum-catalyzed silicone that is versatile and easy to use. Parts A and B are mixed 1:1 by weight or volume, pot life is about 2.5 minutes and rubber cures in about 5 minutes at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and pouring. Rubber cures without a “tacky” surface, is very soft, very strong and very “stretchy”, stretching many times its original size. Ecoflex® 00-35 FAST is off-white translucent and can be color pigmented using Silc Pig® silicone color pigments. Certified Skin Safe – Material is skin safe and certified by an independent laboratory to OECD TG 439. Liquid Ecoflex® 00-35 FAST will cure against the skin and can be used for life casting applications to make rubber molds that cure quickly and are good for casting wax, resins, etc. Ecoflex® 00-35 FAST can also be used for a variety of skin safe applications including making fast skin safe appliances for special effects and cosplay, cushioning for orthopedic and orthotic devices worn on the body and much more. Ecoflex® 00-35 FAST can also be used to make fast cure rubber molds with high elongation for casting a variety of materials.&&

Product Description
Supplier	BASF
Generic	硅酮
Material Status	Commercial: Active
Features	Good Rigidity,Low Viscosity,Low contractility,Good Tensile Strength,Soft
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ASTM D1475
Specific volume	0.939	cm³/g	ASTM D1475
Shrinkage rate
MD	< 0.10	%	ASTM D2566

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s OO	35		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	1.38	MPa	ASTM D412
100% strain	0.0689	MPa	ASTM D412
Tensile strain
fracture	900	%	ASTM D412
tear strength	6.65	kN/m	ASTM D624

Supplementary information	Nominal value	Unit	Test method
Mixing ratio	1A:1B by volume

THERMAL	Nominal value	Unit	Test method
Operating temperature	-54 to 232	℃
storage stability
23℃	2.5	min	ASTM D2471
Thermosetting mixed viscosity	3500	cP	ASTM D2393
stripping time	5.0	min

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.