| About |
|---|
| Silicone Rubber, HTV Extruded parts; tap water and wastewater contact, Automotive & Transportation Hoses, Automotive, Automotive & Transportation Spark Plugs Boots, Automotive & Transportation Exhaust-Pipe Suspensions, Automotive & Transportation Vibration Dampers, Automotive & Transportation Molded Seals, Plastics and Rubber Processing Membranes, Automotive & Transportation Ignition and Battery Cables, Cable Industry Ignition and Battery Cables, Automotive & Transportation Extrudates, Automotive, Plastics and Rubber Processing Extrudates, food contact, Plastics and Rubber Processing Extruded parts; tap water and wastewater contact, Plastics and Rubber Processing Extrudates, Technical, Plastics and Rubber Processing Molded Parts, Automotive, Plastics and Rubber Processing Molded Parts, Food Contact, Plastics and Rubber Processing Molded Parts, Technical, Plastics and Rubber Processing Molded parts; tap water and wastewater contact, Plastics and Rubber Processing Sealant Profiles, Construction&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Food contact compliance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | Clear/Transparent | ||
| Density | 1.15 | g/cm³ | ISO 1183 |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 61 | DIN 53505 | |
| tensile strength | 11.0 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 440 | % | DIN 53504 |
| Compression deformation | 31 | % | DIN ISO 815-B |
| tear strength | 24.0 | kN/m | ASTM D624-B |
| Resilience | 57 | % | DIN 53512 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |