| About |
|---|
| KYDEX® FST is a proprietary, high performance thermoplastic sheet specifically formulated to meet all Boeing and Airbus toxicity requirements for aircraft interior components. KYDEX® FST meets all fire, smoke and heat release requirements set forth in Federal Aviation Regulations 25.853 paragraphs (a) and (d) as well as toxicity requiremetns for ABD0031, BSS7239 and D6-51377. Its excellent properties make is the ideal material to form 2 and 3-dimensional aircraft components.&& |
| Product Description | |
|---|---|
| Supplier | Sekisui |
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Antimicrobial properties,Flame Characteristics,Low toxicity |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 121 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-grade, 3.18 mm | 125 | ASTM D785 | |
| tensile strength | |||
| Yield, 3.18 mm | 74.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 2320 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 3.18 mm | 107 | MPa | ASTM D790 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Smoke Toxicity | Pass | ||
| — | Pass | FAR 25.853(a | |
| Heat release rate | FAR 25.853(d | ||
| Smoke Generation | Pass | FAR 25.853(d |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ABD0031, BSS7239, D6-51377 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |