| About |
|---|
| COMTREX FLEXIBLE PVC 81XCF is a Cadmium Free Extrusion / Injection Molding grade compound typically used in interior trim moldings. This compound is available in custom matched black and integral colors. Gloss level will depend on mold design and application. Designed to meet General Motors Interior specification GMP.PVC.037.&& |
| Product Description | |
|---|---|
| Supplier | Mitsubishi |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low to no calcium content |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.33 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| 15 seconds | 83 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 17.0 | MPa | ASTM D412A |
| Tensile strain | |||
| fracture | 320 | % | ASTM D412A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | |||
| -30℃，2.50 cm | No Cracks | GM 9503P |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| atomization | |||
| Dry Fog | 83.0 | GM 9305P |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Color stability | Delta E Acceptable. No objectionable defects | SAE J1885 | |
| High Temperature Humidity Resistance | No Objectionable Tackiness | GM 9329P | |
| Volatile loss | |||
| 72 hours，79℃ | 1.5 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. 601.6 kJ/m² exp to Interior Xenon Weather-ometer per SAE J1885. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |