Polyopt® BLS64

About
Orange peel/Velvet, nature colour, Polystyrene (PS)&&

Product Description
Supplier	OMAY
Generic	PS
Material Status	Commercial: Active
Features	HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Shrinkage rate	0.20 to 0.60	%	Internal Method
Water absorption rate
Equilibrium, 23 ℃, 50% RH	0.30	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength	48.0	MPa	ISO 527-2
Tensile strain
fracture	2.0	%	ISO 527-2
Bending modulus	3150	MPa	ISO 178
bending strength	94.0	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	102	℃	ISO 306
Hot deformation temperature	86	℃	ISO 306

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+16	ohms	IEC 60093
Volume resistivity	1.0E+13	ohms·cm	IEC 60093
Dielectric constant	3.70		IEC 60250

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

optical performance	Nominal value	Unit	Test method
Transmittance	55.0 to 65.0	%	ASTM D1003
Haze	> 95	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.