| About |
|---|
| Moplen EP240H is a nucleated heterophasic copolymer used in injection moulding as well as for thermoforming applications. It exhibits excellent low temperature impact strength combined with a good processability. Moplen EP240H is typically used by customers for crates and thermoformed margarine tubs.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Nucleation,Food contact compliance,low-temperature impact resistance,Impact copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 230℃，2.16 kg | 2.70 | cm³/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20℃ | 8.0 | kJ/m² | ISO 179/1eA |
| 0℃ | 12 | kJ/m² | ISO 179/1eA |
| 23℃ | 60 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -20℃ | 无断裂 | ISO 179/1eU | |
| 0℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 80.0 | ℃ | ISO 75-2/B |
| Toughness/brittle transition temperature | -47.0 | ℃ | ISO 6603-2 |
| Vicat Softening Temp | |||
| A50 | 148 | ℃ | ISO 306/A50 |
| B50 | 60.0 | ℃ | ISO 306 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 73 | DIN 67530 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H358/30 | 44.0 | MPa | ISO 2039-1 |
| Tensile modulus | 1100 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 23.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 8.0 | % | ISO 527-2 |
| fracture | > 50 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |