PRL NY66-G43-(color)H

About
PRL NY66-G43-(color)H is a Polyamide 66 (Nylon 66) product filled with 43% glass fiber. It can be processed by injection molding and is available in North America. Characteristics include: RoHS Compliant Heat Stabilizer Lubricated&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Lubricating,Heat Stabilized
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³	ASTM D792
Shrinkage rate
MD	0.20 to 0.40	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
Yield, 3.18 mm	200	MPa	ASTM D638
Fracture, 3.18 mm	200	MPa	ASTM D638
Bending modulus
3.18 mm	11000	MPa	ASTM D790
bending strength
3.18 mm	276	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	120	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed, 3.2 mm	260	℃	ASTM D648
1.8 MPa, unannealed, 3.2 mm	252	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	74 to 85	°C
Drying time	3.0 to 4.0	hr
Drying time, maximum	8.0	hr
Barrel rear temperature	271 to 282	°C
Barrel middle temperature	277 to 288	°C
Barrel front temperature	293 to 304	°C
Processing (melt) temperature	288 to 299	°C
Mold temperature	66 to 104	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.