About |
---|
BGR313 is a 30% chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. BGR313 has been developed especially for demanding applications in various engineering sectors. BGR313 has very high rigidity and impact strength, good detergent resistance, antistatic, good dimensional stability and good creep resistance also at high temperatures. APPLICATIONS Product requiring very high overall mechanical performance such as: Domestic appliance components like washing machine tubs. Electrical tool and appliance components Miscellaneous automotive technical items&& |
Product Description | |
---|---|
Generic | PP not specified |
Material Status | Commercial: Active |
Features | Good Rigidity,Good flexibility,High impact resistance,Good Dimensional Stability,Renewable resources,Chemical coupling,Antistatic property,Resistance to detergents,HB |
Availabilitys | Europe |
Process Methods | Injection Molding |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.13 | g/cm³ | ISO 1183 |
Melt Flow Rate | |||
230℃,2.16kg | 2.0 | g/10min | ISO 1133 |
Shrinkage rate | |||
TD | 1.1 | % | |
MD | 0.16 | % |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Tensile modulus | 7400 | MPa | ISO 527-1-2 |
tensile strength | |||
yield | 100 | MPa | ISO 527-2/50 |
Tensile strain | |||
yield | 3.0 | % | ISO 527-2/50 |
Bending modulus | 5900 | MPa | ISO 178 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Charpy Notched Impact Strength | |||
23℃ | 9.0 | kJ/m² | ISO 179/1eA |
Charpy Unnotch Impact strength | |||
23℃ | 41 | kJ/m² | ISO 179/1eU |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Hot deformation temperature | |||
1.8 MPa, unannealed | 143 | ℃ | ISO 75-2/A |
0.45 MPa, unannealed | 159 | ℃ | ISO 75-2/B |
Vicat Softening Temp | |||
— | 164 | ℃ | ISO 306/A |
— | 135 | ℃ | ISO 306/B |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
Flame retardant level | HB | UL 94 |
Process Conditions | |||
---|---|---|---|
injection | Nominal value | Unit | Test method |
Processing (melt) temperature | 210 to 260 | °C | |
Mold temperature | 30 to 60 | °C | |
Injection speed | Slow-Moderate |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. 150x80x2 mm |
3. 0.079 in/min |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |