| About |
|---|
| TD310BF – is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No.: 25895-47-0 Applications TD310BF is recommended for: Lamination films Sealing layer in coextrusion Food packaging Additives TD310BF contains antiblock but no slip agent Special features TD310BF is optimised to deliver: High seal strength and hot tack force Lowest volatiles and fumes during processing Wide sealing window Good stability of surface tension Optimised balance between high melting point for easy processing and low sealing temperature Metallisable Low taste & odour Excellent optical properties Low content of amorphous polymer&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Smoothness,Renewable resources,High anti-blocking,Low odor,Electroplating,Terpolymer,Low temperature heat sealing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Initial sealing temperature | |||
| 30 µm | 103 | ℃ |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 130 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2 N, ABA structure with 1 µm skin layer thickness |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |