| About |
|---|
| This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability Good WVTR Good heat seal Typical extrusion coating applications may include: Liquid packaging Cup stock Folding carton General paper and board coating&& |
| Product Description | |
|---|---|
| Supplier | Chevron Phillips |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Kosher certification |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 5.0 | g/10min | ASTM D1238 | |
| Water vapor transmittance | 0.410 | cc-mm/m²-24hr-atm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |