EPO-TEK® OG675

About
A UV fast curing, optically clear adhesive offering compliance and high strength. Formerly 75-145&&

Product Description
Generic环氧树脂
Material StatusCommercial: Active
FeaturesGood Rigidity,UV Cure,Fast Cure
AvailabilitysAfrica & Middle East ,North America,Asia Pacific,Europe

Technical Data
optical performanceNominal valueUnitTest method
Refractive index1.479 
Transmittance
400-1660 nm> 98.0%

Supplementary informationNominal valueUnitTest method
Degradation Temperature365
working temperature 
Continuous-55 to 200
Intermittent-55 to 300
Heating reduction 
200℃0.33%
250℃1.1%
300℃2.5%

Uncured PropertiesNominal valueUnitTest method
colourClear/Transparent 
Density1.11g/cm³
viscosity
23℃3.4Pa·s

Cured PropertiesNominal valueUnitTest method
Shore hardness
Shaw’s A70 

THERMALNominal valueUnitTest method
4.1E-5cm/cm/℃
2.0E-4cm/cm/℃
Linear coefficient of thermal expansion
MD 
Storage period
23℃52wk

Notes
1. Typical properties: these are not to be construed as specifications.
2. Below Tg
3. Above Tg
4. 589 nm
5. 100 rpm
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.