Microthene® F FN51900

About
Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.&&

Product Description
Supplier	LyondellBasell
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.923	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	5.3	g/10min	ASTM D1238
Particle Shape	Spherical
Particle size distribution	5.0 to 50.0	µm	ETM Malvern
Average particle size	20	µm	ETM Malvern

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-76.0	℃	ASTM D746
Vicat Softening Temp	97.0	℃	ASTM D1525
Melting peak temperature	110	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Maximum Moisture Content	0.10	%	ETM 156

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	53		ASTM D2240
tensile strength
fracture	12.4	MPa	ASTM D638
Tensile strain
fracture	550	%	ASTM D638
Bending modulus	276	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.