SABIC® HDPE CC862

About
SABIC HDPE CC862 is high density polyethylene specially developed for still water bottle caps that meet organoleptic properties requirements. The material offers an ideal combination of rigidity, impact strength and low warpage properties. Typical Applications Caps & Closures for the packaging of still mineral water Caps & Closures for beverage food and industrial packaging Special Features Good organoleptics properties Complies with food contacts regulations Slip agent free grade&&

About

SABIC HDPE CC862 is high density polyethylene specially developed for still water bottle caps that meet organoleptic properties requirements. The material offers an ideal combination of rigidity, impact strength and low warpage properties. Typical Applications Caps & Closures for the packaging of still mineral water Caps & Closures for beverage food and industrial packaging Special Features Good organoleptics properties Complies with food contacts regulations Slip agent free grade&&

Product Description
Supplier	SABIC
Generic	HDPE
Material Status	Commercial: Active
Features	Low warping,High impact resistance,Food contact compliance,Good sensory characteristics.
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.963	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	8.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, molded, F50	3.00	hr	ASTM D1693B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
Injection molding	75	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	62		ASTM D2240
tensile strength			ASTM D638
Yield, injection molding	26.0	MPa	ASTM D638
Fracture, injection molding	18.0	MPa	ASTM D638
Tensile strain
Fracture, injection molding	> 800	%	ASTM D638
Bending modulus
injection molding	1000	MPa	ASTM D790
bending strength
injection molding	25.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.