DAI-EL™ G-751

About
DAI-EL™ G-751 DAI-EL G-751 is a cure incorporated copolymer designed for transfer and compression molding applications. G-751 demonstrates good adhesion and excellent processability both in mill and calendaring operations.&&DAI-EL™ G-751 DAI-EL G-751 is a fluoroelastomer comprising copolymer of vinylidenefluoride and hexafluoropropylene, and containing a curing agent (bisphenol AF) and cure accelerator. This material provides excellent roll processability and metal adhesion.&&

About

DAI-EL™ G-751 DAI-EL G-751 is a cure incorporated copolymer designed for transfer and compression molding applications. G-751 demonstrates good adhesion and excellent processability both in mill and calendaring operations.&&DAI-EL™ G-751 DAI-EL G-751 is a fluoroelastomer comprising copolymer of vinylidenefluoride and hexafluoropropylene, and containing a curing agent (bisphenol AF) and cure accelerator. This material provides excellent roll processability and metal adhesion.&&

Product Description
Supplier	Daikin Fluorochemicals
Generic	氟橡胶
Material Status	Commercial: Active
Features	Excellent Processability,Good bond,Copolymer
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.81 to 1.85	g/cm³
Mooney viscosity
ML 1+10，121℃	30	MU
Fluorine content	66	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 25 ℃	72

elastic body	Nominal value	Unit
tensile strength
Yield, 25 ℃	15.1	MPa
100% strain, 25 ℃	5.00	MPa
Tensile strain
Fracture, 25 ℃	200	%
tear strength
25℃	19.6	kN/m
Compression deformation
25℃，70 hr	8.0	%
100℃，70 hr	5.0	%
175℃，70 hr	11	%
200℃，70 hr	18	%

Aging performance	Nominal value	Unit
The rate of change in tensile strength in air
230℃，70 hr	6.0	%
The rate of change in ultimate elongation in air
230℃，70 hr	5.0	%
The rate of change in hardness of a hardness tester in the air
Shore A, 230 ℃, 70 hr	0.0

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-17.0	℃

Supplementary information	Nominal value	Unit
curing temperature	170	℃
Curing time
Curelastmeter	2.8	min
Gehman Torsion Test
T10	13	℃
T2	-6	℃
TR Test
TR10	-18	℃
TR70	-9	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.