| About |
|---|
| Sarlink TPE FM-2669 is a general purpose thermoplastic elastomer available in Nat, Blk, and colors, used in a variety of automotive interior applications including floor mats. Sarlink TPE FM-2669 is a UV stabilized, medium hardness, high density, wear-resistant grade suitable for extrusion, injection molding, or thermoforming.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good flexibility,Low liquidity,Good bond,Good wear resistance,High density,Solvent resistance,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.10 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 6.00 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 500 | % | ISO 37 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shore A, 1 second, injection molding | 79 | ISO 868 | |
| Shore A, 5 seconds, injection molding | 75 | ISO 868 | |
| Shore A, 15 seconds, injection molding | 74 | ISO 868 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 227 to 249 | °C | |
| Barrel middle temperature | 227 to 249 | °C | |
| Barrel front temperature | 227 to 249 | °C | |
| Nozzle temperature | 227 to 249 | °C | |
| Processing (melt) temperature | 227 to 249 | °C | |
| Mold temperature | 16 to 32 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Injection speed | Fast | ||
| Back pressure | 0.172 to 0.862 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 216 to 238 | °C | |
| Barrel 2 zone temperature | 216 to 238 | °C | |
| Barrel 3 zone temperature | 216 to 238 | °C | |
| Barrel 4 zone temperature | 216 to 238 | °C | |
| Barrel 5 zone temperature | 216 to 238 | °C | |
| Nozzle temperature | 216 to 238 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |