Trademark PE LD2920F

About
Trademark PE LD2920F is a Low Density Polyethylene product. It is available in North America. Applications of Trademark PE LD2920F include bags/liners, film, food contact applications, industrial applications and packaging. Characteristics include: Antiblock Food Contact Acceptable Good Processability Good Toughness Slip&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,Good dissection,Food contact compliance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	51	µm
Secant modulus			ASTM D882
1% secant, MD: 51 µ m, blow molded film	179	MPa	ASTM D882
1% secant, TD: 51 µ m, blow molded film	217	MPa	ASTM D882
tensile strength			ASTM D882
MD, fracture, 51 µ m, blow molded film	21.4	MPa	ASTM D882
TD, fracture, 51 µ m, blow molded film	15.9	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 51 µ m, blow molded film	200	%	ASTM D882
TD, fracture, 51 µ m, blow molded film	510	%	ASTM D882
Drop hammer impact
51 µ m, blow molded film	110	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 51 µ m, blow molded film	320	g	ASTM D1922
TD: 51 µ m, blow molded film	110	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
Haze
50.8 µ m, blow molded film	11	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	182 to 199	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.