| About |
|---|
| A soft, colorable thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for use in residential washing machine and dishwasher applications and contains a stabilization system for protection against copper and other metal-catalyzed degradation. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It is polyolefin based and recyclable within the manufacturing stream.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Material Status | Commercial: Active |
| Features | Ozone resistance,Copper contact stability,Good Dimensional Stability,Renewable resources |
| Availabilitys | Europe,Asia Pacific,Africa & Middle East ,Latin America,North America |
| Process Methods | Profile extrusion,Extrusion,Multiple injection molding,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ASTM D792 |
| Density | 0.960 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture, 23 ℃ | 5.10 | MPa | ASTM D412 |
| TD, fracture, 23 ℃ | 5.10 | MPa | ISO 37 |
| TD, 100% strain, 23 ℃ | 1.90 | MPa | ISO 37 |
| TD, 100% strain, 23 ℃ | 1.90 | MPa | ASTM D412 |
| Tensile strain | |||
| TD, fracture, 23 ℃ | 450 | % | ASTM D412 |
| TD, fracture, 23 ℃ | 450 | % | ISO 37 |
| Compression deformation | ASTM D395B | ||
| 23℃，22 hr | 16 | % | ASTM D395B |
| 70℃，22 hr | 35 | % | ASTM D395B |
| 100℃，22 hr | 42 | % | ASTM D395B |
| 100℃，300 hr | 47 | % | ASTM D395B |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 16 | % | ISO 815 |
| 70℃，22 hr | 35 | % | ISO 815 |
| 100℃，22 hr | 42 | % | ISO 815 |
| 100℃，300 hr | 47 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds, 23 ℃ | 60 | ISO 868 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 1 |
| 3. Type A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |