| About |
|---|
| Caltex PP M720 is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific for blow molding or sheet extrusion. Important attributes of Caltex PP M720 are: Flame Rated Copolymer Impact Resistant Typical application of Caltex PP M720: Packaging&& |
| Product Description | |
|---|---|
| Supplier | GS Caltex |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Impact copolymer,Good Tensile Strength,High impact resistance,HB |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 0.9 | g/cm³ | ISO 1183 | |
| 0.9 | g/cm³ | ASTM D792 | |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.60 | g/10min | ISO 1133 |
| 230℃，2.16kg | 1.1 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 60 | KJ/m² | ISO 180/1A |
| -10℃ | 10 | KJ/m² | ISO 180/1A |
| 23℃ | >500 | J/m | ASTM D256 |
| -10℃ | 50 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 100 | ℃ | ISO 75 |
| 0.45 MPa, unannealed | 120 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 85 | R Scale | ASTM D785 |
| R-level | 85 | R Scale | ISO 2039 |
| Tensile Strength | |||
| 29 | MPa | ISO 527-2 | |
| 29 | MPa | ASTM D638 | |
| Elongation at Break | |||
| >400 | % | ISO 527-2 | |
| >500 | % | ASTM D638 | |
| Flexural Modulus | |||
| 1500 | MPa | ASTM D790 | |
| 1450 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |