Vikalloy IM62 - SOLIAO

About
Vikalloy IM62 is an Acrylic (PMMA) + PVC (PMMA+PVC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Vikalloy IM62 are: Flame Rated Chemical Resistant Flame Retardant Impact Resistant Weather Resistant Typical applications include: Electrical/Electronic Applications Wire & Cable Appliances Medical/Healthcare Tools&&

Product Description
Generic	PMMA+PVC
Material Status	Commercial: Negative
Features	Weather resistance is good,High impact resistance,Flame Characteristics,Solvent resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ASTM D792
Melt Flow Rate
190℃，21.6kg	34	g/10min	ASTM D1238
Shrinkage rate
MD	0.20 to 0.40	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	44.8	MPa	ASTM D638
Bending modulus	2250	MPa	ASTM D790
bending strength	64.8	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	960	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
1.8 MPa, unannealed	70.6	℃	ASTM D648
1.8 MPa, annealed	75.0	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
2.00 mm	V-0 5VA		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	54 to 71	°C
Drying time	4.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.