KMI PP KM-ZW0274

About
KM-ZM0274 is a nucleated impact copolymer with a melt flow of 25 g/10 min. Characteristics: KM-ZM0274 has high impact resistance, creep resistance, improved stiffness, excellent antistatic properties and allows for faster cycling through early demolding. KM-ZW0274 is used specifically for injection molding of thin-walled articles, housewares, and garden furniture.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High impact resistance,Nucleation,Quick molding cycle,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	27.6	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
-20℃	4.5	kJ/m²
23℃	9.5	kJ/m²
Impact strength of cantilever beam notch
-20℃	48	J/m	ASTM D256
23℃	110	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525
Melting temperature	160 to 165	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.