Baydur® TB 100-30 Thermal Break System

About
The Baydur TB 100-30 thermal break system produces a structural, full density polyurethane used for window applications. The system is supplied as two reactive liquid components. Component A is a polymeric diphenylmethane diisocyanate (PMDI), and Component B is a formulated polyol system that is phase stable. Baydur TB 100-30 is a fast debridging system, designed to have excellent physical properties while exhibiting minimal wet shrinkage. As with any product, use of the Baydur TB 100-30 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

About

The Baydur TB 100-30 thermal break system produces a structural, full density polyurethane used for window applications. The system is supplied as two reactive liquid components. Component A is a polymeric diphenylmethane diisocyanate (PMDI), and Component B is a formulated polyol system that is phase stable. Baydur TB 100-30 is a fast debridging system, designed to have excellent physical properties while exhibiting minimal wet shrinkage. As with any product, use of the Baydur TB 100-30 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

Product Description
Supplier	Covestro
Generic	PUR+MDI
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ASTM D1622
K (wear) coefficient	0.13	W/m/K	ASTM C518

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
6.4mm	100	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 5 seconds, 6.35 mm	78		ASTM D2240
tensile strength
Fracture, 6.35 mm	39.3	MPa	ASTM D638
Tensile strain
Fracture, 6.35 mm	30	%	ASTM D638
Bending modulus
6.35 mm	1550	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 6.35 mm	81.1	℃	ASTM D648
Thermosetting components
Component A	按重量计算的混合比: 85, 按容量计算的混合比: 75
Component B	按重量计算的混合比: 100, 按容量计算的混合比: 100

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.