| About |
|---|
| ROTOUN® HDPE411U is a High Density Polyethylene product. It can be processed by rotational molding and is available in Asia Pacific. Typical application: Housings. Characteristics include: RoHS Compliant UV Stabilized&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High density |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 | g/cm³ | GB/T 1033 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 6.0 | g/10min | GB/T 3682 |
| ESCR(Environmental Stress Cracking Resistance) | 300 | hr | GB/T 1842 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.0 | MPa | GB/T 1040 |
| Tensile strain | |||
| yield | 600 | % | GB/T 1040 |
| Bending modulus | 750 | MPa | GB/T 9341 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 150 | J/cm | ARM |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 128 | ℃ | GB/T 1633 |
| Oxygen sensing time | |||
| 60℃ | 15000 | min | GB/T 15558 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| UV Rating | 10000 | hr | ASTM D2565 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |