| About |
|---|
| Description Y910A is a high-density polyethylene resins for stretched yarn applications. This grade is designed to be processed in conventional extrusion stretching equipment. Characteristics Y910A offers excellent processability and thermal stability during extrusion process. Good stretchability during hot press stretching allows high production speed with this grade. Stretched yarn products made from this grade offer high tensile strength and abrasion resistance. Applications Flat Yarn (T-DIE) Mono-filaments for fishing net and Ropes Flat yarn woven bag, Tarpaulin, Sacks Major Property Requirements Low gel/fish-eye material Good processability Good stretchability at the stretching stage Good mechanical strength and abrasion resistance High environmental stress crack resistance&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low speed solidification point,Good Tensile Strength,Good wear resistance,High density,Heat Stabilized,High ESCR |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.90 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 200 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 50 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| yield | 24.5 | MPa | ASTM D638 |
| fracture | 34.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 883 | MPa | ASTM D747 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |