| About |
|---|
| Monprene OM-10260 is a specialty thermoplastic elastomer, available in NAT and colors, designed for overmolding applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-10260 is a medium hardness, medium density, RoHS compliant grade that exhibits excellent adhesion to PC, ABS, and PC/ABS. |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Ductility,High elastic,Good liquidity,Halogen free,Good stripping performance,Good color stability,Lubricating,Good wear resistance,Solvent resistance,Soft,Good coloring,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second, injection molding | 55 | ||
| Shore A, 1 second, injection molding | 62 | ||
| Shore A, 5 seconds, injection molding | 60 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength (fracture) | 5.52 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Squeezing instructions | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Temperature at the rear of the barrel | 227 to 249 | °C | |
| Temperature in the middle of the barrel | 227 to 249 | °C | |
| Front temperature of material barrel | 227 to 249 | °C | |
| Nozzle temperature | 227 to 249 | °C | |
| Processing (melt) temperature | 227 to 249 | °C | |
| Mold temperature | 16 to 32 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Injection speed | 快速 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| cushion | 3.81 to 25.4 | mm | |
| Temperature of material cylinder zone 1 | 216 to 238 | °C | |
| Temperature of material cylinder zone 2 | 216 to 238 | °C | |
| Temperature of material cylinder zone 3 | 216 to 238 | °C | |
| Temperature of material cylinder zone 4 | 216 to 238 | °C | |
| Temperature of material cylinder zone 5 | 216 to 238 | °C | |
| Mouth temperature | 216 to 238 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |