| About |
|---|
| EMERGE™ PC 8130 Advanced Resin is an ignition-resistant polycarbonate resin with improved UV stability. It is designed for thin-wall applications and has a UL94 V-0 rating at 1.0 mm. EMERGE PC 8130 is also f1 rated according to UL 746C. This resin does not contain chlorine or bromine additives. Main Characteristics: Ignition resistant UV resistant Applications: Powered Device Housings Information technology equipment Electrical parts&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | 5VA,Flame Characteristics,5VB,Good liquidity,V-0,Weather resistance is good,V-1,Halogen free |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 300℃，1.20kg | 10 | g/10min | ASTM D1238 |
| Molding shrinkage | |||
| MD | 0.50 to 0.70 | % | ASTM D955 |
| Water Absorption | |||
| 23℃，24hr | 0.15 | % | ASTM D570 |
| Weathering resistance | f1 | UL 746C | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 2380 | MPa | ASTM D638 |
| Tensile Strength | |||
| Broken BRK | 59.0 | MPa | ISO 527-2/50 |
| Broken BRK | 58.6 | MPa | ASTM D638 |
| Yield yld | 61.0 | MPa | ISO 527-2/50 |
| Yield yld | 61.4 | MPa | ASTM D638 |
| Tensile Strain | |||
| Broken BRK | 120 | % | ASTM D638 |
| Yield yld | 6.0 | % | ASTM D638 |
| Flexural Modulus | 2330 | MPa | ASTM D790 |
| Flexural Strength | 97.9 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 690 | J/m | ASTM D256 |
| Dart impact equipped with measuring instruments | 62.1 | J | ASTM D3763 |
| Tensile Impact Strength | 630 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed, 6.4 mm | 127 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 6.4 mm | 137 | ℃ | ASTM D648 |
| Vicat Softening Temperature | 151 | ℃ | ASTM D1525 |
| Coeff. of linear thermal expansion | |||
| MD | 6.5E-5 | 1/℃ | ASTM D696 |
| Relative Temperature Index (RTI) | |||
| Electrical performance Elec | 130 | ℃ | UL 746 |
| Strength mechanical performance str | 130 | ℃ | UL 746 |
| Impact mechanical performance IMP | 115 | ℃ | UL 746 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Arc Resistance | PLC 7 | ASTM D495 | |
| Compared Tracking Index | PLC 2 | UL 746 | |
| High Arc Burning Index (HAI) | UL 746 | ||
| 0.9 mm | PLC 2 | UL 746 | |
| 1.0 to 3.0 mm | PLC 1 | UL 746 | |
| High voltage arc ignition resistance index (HVAR) (PLC) | PLC 1 | UL 746 | |
| Hot wire ignition (HWI) (0.9 to 3.0 mm) | PLC 2 | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | Internal Method | ||
| 0.90 mm, all colors | V-1 | Internal Method | |
| 0.90 mm, black, white | V-0 | Internal Method | |
| 1.00 mm, all colors | V-0 | Internal Method | |
| 2.00 mm, all colors | 5VB | Internal Method | |
| 3.00 mm, all colors | 5VA | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Melt Temperature | 288 to 302 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |