TOPAS® 8007S-04

About
TOPAS® 8007S-04 Product Description TOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries. Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 – our highest ultraviolet (UV) transmission grade&&TOPAS® 8007S-04 TOPAS® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Africa & Middle East, Asia Pacific, or Latin America. Characteristics include: Flame Rated Copolymer&&

About

TOPAS® 8007S-04 Product Description TOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries. Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 – our highest ultraviolet (UV) transmission grade&&TOPAS® 8007S-04 TOPAS® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Africa & Middle East, Asia Pacific, or Latin America. Characteristics include: Flame Rated Copolymer&&

Product Description
Supplier	Polyplastics
Generic	COC
Material Status	Commercial: Active
Features	Good Clarity,Low extract,High purity,Ethanol tolerance,Halogen free,Food contact compliance,High Heat Resistance,Moisture resistance,No BPA,Radiation disinfection,Copolymer,Solvent resistance,Ethylene oxide disinfection,Amorphous
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ISO 1183
Water absorption rate
23℃，24hr	0.01	%	ISO 62
Melt Flow Rate
260℃，2.16kg	32	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	63	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	4.5	%	ISO 527-2
Tensile modulus
23℃	2600	MPa	ISO 527-2

optical performance	Nominal value	Unit	Test method
Refractive index	1.53		ISO 489
Transmittance
2000 μm	91	%	ISO 13468-2

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	75	℃	ISO 75-2/Bf
Glass transition temperature	78	℃	ISO 11357-2
Vicat Softening Temp
B50	80	℃	ISO 306

Electrical performance	Nominal value	Unit	Test method
Volumetric resistance	1.0E+14	Ω.cm	IEC 60093
Dielectric constant
23℃	2.35	1 kHz	IEC 60250
Dissipation factor
Compared to the leakage tracing index	600	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50mm	HB		UL-94

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	20	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength
23℃	2.6	kJ/m²	ISO 179/1eA

Notes
1. Typical properties: these are not to be construed as specifications.
2. Dependent on processing conditions and part design.
3. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.