Mapex AN0920SN

About
Mapex AN0920SN是一种聚酰胺6（尼龙6）产品,含有的填充物为45% 玻璃纤维增强材料。它可以通过注射成型进行加工,在亚太地区、北美洲、欧洲或非洲和中东有供货。 Mapex AN0920SN的应用领域包括体育用品、手柄、汽车行业和生活消费品。特性包括: 坚硬耐热&&

Product Description
Supplier	Ginar Technology
Generic	PA6
Material Status	Commercial: Active
Features	Good Rigidity,High Heat Resistance
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.51	g/cm³	ASTM D792
Shrinkage rate
MD	0.20	%	ASTM D955
Water absorption rate
24hr	0.90	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	120	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	121		ASTM D785
tensile strength	165	MPa	ASTM D638
Tensile strain
fracture	2.0	%	ASTM D638
Bending modulus	10300	MPa	ASTM D790
bending strength	241	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.20	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.