Malen E FABS 23-D022

About
Malen E FABS 23-D022 is designed for fine packaging films with thicknesses starting at 25 micons. The presence of anti-block and slip agent means extruded film may be used on automatic packaging systems. Films made out of Malen E FABS 23-D022 are notable for their high gloss and transparency. This product is not intended for use in medical and pharmaceutical applications.&&

Product Description
Supplier	LyondellBasell
Generic	LDPE
Material Status	Commercial: Active
Features	Good surface appearance,Smoothness,Optical performance,High anti-blocking
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919 to 0.923	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	1.6 to 2.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	11.0	MPa	ISO 8986-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	90.0	℃	ISO 306

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.