Vipel® F701-ABU-25

About
AOC’s Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins. They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00. BENEFITS Corrosion resistance AOC’s Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up and filament winding.&&

About

AOC’s Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins. They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00. BENEFITS Corrosion resistance AOC’s Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up and filament winding.&&

Product Description
Generic	间苯二甲酸聚酯
Material Status	Commercial: Active
Features	Corrosion Resistant,Acidproof,High molecular weight,Grease resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
styrene content	48	%

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	107	℃	ASTM D648

Supplementary information	Nominal value	Unit
Gel to Peak	12.0	min
exothermic peak	199	℃
Thixotropic index	2.00

Uncured Properties	Nominal value	Unit
Density	1.06	g/cm³
viscosity
Brookfield LV	0.55	Pa·s
Gelation time
25℃	25	min

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	43		ASTM D2583
Tensile modulus	3790	MPa	ASTM D638
tensile strength	83.4	MPa	ASTM D638
Tensile strain
fracture	2.8	%	ASTM D638
Bending modulus	4210	MPa	ASTM D790
bending strength	127	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.