Sipchem LD 2023

About
Sipchem LD 2023 Low Density Polyethylene resin, manufactured by IPC† in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. LD 2023 is designed to offer a good balance of optical and mechanical properties. Applications: Blend Partner, Cast Film, Compounding, Foam, Food Packaging, Form Fill and Seal Packaging, Freezer Film, Lamination Film, Light Duty Shrink Film, Liners, Mail Bag, Produce Bags, Shoppers, Textile Packaging, Tough Medium Sized Molding.&&

About

Sipchem LD 2023 Low Density Polyethylene resin, manufactured by IPC† in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. LD 2023 is designed to offer a good balance of optical and mechanical properties. Applications: Blend Partner, Cast Film, Compounding, Foam, Food Packaging, Form Fill and Seal Packaging, Freezer Film, Lamination Film, Light Duty Shrink Film, Liners, Mail Bag, Produce Bags, Shoppers, Textile Packaging, Tough Medium Sized Molding.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Low density
Availabilitys	Africa & Middle East ,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.923	g/cm³	Internal Method
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus
1% secant, MD	210	MPa
1% secant, TD	230	MPa
tensile strength
MD, yield	11.0	MPa
TD, yield	11.0	MPa
MD, fracture	25.0	MPa
TD, fracture	22.0	MPa
Tensile strain
MD, fracture	330	%
TD, fracture	550	%
Drop hammer impact	80	g	ASTM D1709-A
Elmandorf tear strength
MD	150	g
TD	120	g

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	110	℃	ASTM D3418

optical performance	Nominal value	Unit	Test method
gloss
45°	63		ASTM D2457
Haze	6.1	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.