| About |
|---|
| Commercial polymers are classified into two types; one is the TFE-P dipolymer type (AFLAS® 100/150 Series), and the other is the TFE-P-VdF terpolymer type (AFLAS® 200Series). AFLAS® 200 Series is characterized by the improved low temperature properties, demoldability and metal bonding while maintaining most of the high heat and chemical resistance and electrical resistivity of the dipolymer. Below the current polymer grades are listed, which are mainly classified according to Mooney viscosity. Dipolymer is mostly used in the wire and cable, and automotive industries, while terpolymer is often favored for automotive use in terms of processability.&& |
| Product Description | |
|---|---|
| Supplier | Asahi Glass |
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Good Rigidity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.55 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+10，100℃ | 160 | MU | |
| ML 1+10，121℃ | 115 | MU | ASTM D1646 |
| Fluorine content | 57 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -3.00 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |