| About |
|---|
| Ultramid B33 01 is an intermediate viscosity. PA6 grade. It conforms to FDA requirements including, 21 CFR 177.1500, EU Directive 2002/72/EC, the German BfR recommendation “X Polyamide”, 1.6.1998 or legislations for other countries will be provided on request. Applications Typical applications include production of biaxial oriented and cast film and monofilaments.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Grease resistance |
| Availabilitys | North America |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Apparent density | 0.70 | g/cm³ | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 9.5 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 2.6 | % | ISO 62 |
| Viscosity number | |||
| 96% H2SO4 | 195 | cm³/g | ISO 307 |
| water content | < 0.10 | % | ISO 15512 |
| Relative viscosity | |||
| 1% in 96% Sulfuric Acid | 3.30 | ISO 307 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 220 | ℃ | ISO 3146 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Particle shape | cylindrical | ||
| Particle size | 2.00 to 2.50 | mm |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |