| About |
|---|
| Resin of LTPZE-2000 serials is reinforced composite for special materials of electric appliance based on high linear PPS. For their good electricity characteristics and thermal resistance, they are suitable to wave-soldering with many jointbar, mold in varied electronic component and supersonic bonding parts and integrated circuit package.&& |
| Product Description | |
|---|---|
| Supplier | Letian |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,High Heat Resistance,Ultrasonic soldering,V-2 |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.45 to 1.80 | g/cm³ | GB/T 1033 |
| Shrinkage rate | |||
| TD：3.0 mm | 0.30 to 0.60 | % | |
| MD：3.0 mm | 0.20 to 0.40 | % | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.20 to 0.40 | % | GB/T 1034 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 100 | MPa | GB/T 1040 |
| Tensile strain | |||
| fracture | 1.2 | % | GB/T 1040 |
| bending strength | 120 | MPa | GB/T 1042 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.0E+15 to 3.0E+17 | ohms | GB/T 1410 |
| Volume resistivity | 3.0E+14 to 8.0E+16 | ohms·cm | GB/T 1410 |
| Dielectric strength | 20 to 35 | kV/mm | GB/T 1408 |
| Dielectric constant | GB/T 1409 | ||
| 25 ℃，1 kHz | 2.20 to 3.00 | GB/T 1409 | |
| 25 ℃，1 MHz | 2.20 to 3.00 | GB/T 1409 | |
| Dissipation factor | GB/T 1409 | ||
| 25℃，1 kHz | 1.0E-3 to 3.0E-3 | GB/T 1409 | |
| 25℃，1 MHz | 1.0E-3 to 3.0E-3 | GB/T 1409 | |
| Arc resistance | 110 to 180 | sec | ASTM D495 |
| Compared to the leakage tracing index | 120 to 250 | V | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-2 | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3 mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |