| About |
|---|
| HYBRANCH HP-100F-1 is a Specialty Polystyrene product. It can be processed by extrusion and is available in Asia Pacific or North America. Applications of HYBRANCH HP-100F-1 include film and sheet. Characteristics include: Good Processability High Flow&& |
| Product Description | |
|---|---|
| Supplier | DIC Corporation |
| Generic | PS (special type) |
| Material Status | Commercial: Active |
| Features | Homopolymer |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 to 1.05 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 3.4 | g/10min | ISO 1133 |
| Shrinkage rate | 0.40 to 0.80 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 2.0 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 95.0 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 66 | ISO 2039-2 | |
| tensile strength | |||
| fracture | 51.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 2.0 | % | ISO 527-2 |
| Bending modulus | 3300 | MPa | ISO 178 |
| bending strength | 103 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |