| About |
|---|
| SABIC® PP 522L is particularly designed for extrusion of cast film, both mono layer films and co extruded films. It provides an excellent combination of transparency, stiffness and high heat resistance. It contains a slip agent and anti block additive package. SABIC®PP 522L is the formulated version of SABIC®PP 520P. SABIC® PP 522L is typically used for food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,Smoothness,Wide molecular weight distribution,High anti-blocking,High Heat Resistance,Homopolymer |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ASTM D792 , ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 11 | g/10min | ASTM D1238，ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 1% secant | 1800 | MPa | ASTM D638 |
| — | 1700 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| yield | 36.0 | MPa | ASTM D638 |
| yield | 36.0 | MPa | ISO 527-2/1A/50 |
| Tensile strain | |||
| yield | 9.0 | % | ASTM D638 |
| yield | 9.0 | % | ISO 527-2/1A/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| — | 154 | ℃ | ASTM D1525 5 , ISO 306/A120 5 |
| B120 | 95.0 | ℃ | ASTM D1525 6 , ISO 306/B120 6 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.039 in/min |
| 3. 2.0 in/min |
| 4. Rate B (120°C/h), Loading 1 (10 N) |
| 5. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |