| About |
|---|
| Features: Good processability, rigidity, Impact resistance. High ESCR. Applications: Blow molded containers for: personal care products (shampoo, cosmetics, chlorine solutions, house cleaning) and aggressive chemical (below 20 liters capacity).&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,Inoxidizability,High density,High ESCR |
| Availabilitys | Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.40 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | > 400 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 270 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 28.0 | MPa | ASTM D638 |
| fracture | 26.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 1200 | % | ASTM D638 |
| Bending modulus | 1100 | MPa | ASTM D790 |
| bending strength | |||
| 5% strain | 25.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | 1.5 | J/m | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 127 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 160 to 200 | °C | |
| Nozzle temperature | < 20 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |