| About |
|---|
| VERSIFY™ 2000 塑性体是一种低熔流率的树脂，适用于吹塑薄膜、吹塑模制、挤出和热成型技工。该产品是一种优秀的密封剂，特别适合用于BOPE之中。该产品与PP具有优异的相容性，可以赋予产品以柔软度和高温性能。 主要特性 粒料 熔流率低 优良的密封剂 与PP相容 软质聚丙烯 应用领域 吹塑薄膜 密封剂 BOPE 挤出加工 符合以下法规： 美国食品和药物管理局 FCN 909 美国食品和药物管理局法规 21 CFR 175.105(c)(5) EU, No 10/2011 请查询法规以获取完备的细节资料。&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | POP |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ASTM D1238，ISO 1133 |
| Summary of crystallinity | 35 | % | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -17.0 | ℃ | Internal Method |
| Vicat Softening Temp | 94.0 | ℃ | ASTM D1525 |
| Melting temperature | |||
| DSC | 107 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D523 | ||
| 20 °, 1000 µ m, molded | 108 | ||
| 60 °, 1000 µ m, molded | 119 | ||
| Haze | |||
| 2000 µ m, injection molding | 18 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw A, molded | 96 | ||
| Shaw’s D, molded | 54 | ||
| tensile strength | |||
| Fracture, molded | 26.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 680 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 359 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |