| About |
|---|
| Texalan 4 Series Polyester-based TPU Texalan® 4 series products can be considered as custom-made products which use different raw materials to meet customers special requirements.&& |
| Product Description | |
|---|---|
| Supplier | Austin |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | High impact resistance,High elastic,Antifreeze,Good Tensile Strength,Good wear resistance,Grease resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 – 1.24 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 95 – 101 | ISO 7619 | ||
| tensile strength | >= 45.0 | MPa | ISO 37 |
| tensile strength | >= 18.00 | MPa | ISO 37 |
| tensile strength | >= 30.0 | MPa | ISO 37 |
| Tensile strain | |||
| yield | >= 450 | % | ISO 37 |
| tear strength | >= 120 | kN/m | ISO 34 |
| Friction coefficient | <= 40 | mm³ | ISO 4649 |
| Compression deformation | <= 38 | % | ISO 815 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |