| About |
|---|
| Sarlink TPE ML-2355B is a high performance thermoplastic elastomer designed for molding complex automotive applications. Sarlink TPE ML-2355B is a medium hardness, high density grade having good UV resistance, excellent molding behavior, and faster cycle times versus TPV’s.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good liquidity,Low to No Fogging,Good bond,High density,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.07 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 7.80 | MPa | ISO 37 |
| TD, 100% strain | 1.20 | MPa | ISO 37 |
| Tensile strain | |||
| TD, fracture | 850 | % | ISO 37 |
| Compression deformation | |||
| 70℃，22 hr | 40 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 5 seconds, injection molding | 55 | ISO 868 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent viscosity of melt | |||
| Capillary，206 1/s，200℃ | 168 | Pa·s | ISO 11443 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 170 to 180 | °C | |
| Barrel middle temperature | 180 to 200 | °C | |
| Barrel front temperature | 200 to 220 | °C | |
| Nozzle temperature | 210 to 230 | °C | |
| Processing (melt) temperature | 200 to 230 | °C | |
| Mold temperature | 10 to 60 | °C | |
| Injection pressure | 6.00 to 12.0 | MPa | |
| Injection speed | Fast | ||
| Hold pressure | 4.00 to 6.00 | MPa | |
| Back pressure | 0.500 to 2.00 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |