| About |
|---|
| VIBRATHANE 8030 is an MDI terminated, polycaprolactone based prepolymer that is solid at room temperature. This high performance material yields an 80A durometer urethane when cured with 1,4-Butanediol. It was designed for applications such as wiper blades. VIBRATHANE 8030 elastomers are characterized by: Good low temperature properties Excellent abrasion resistance Excellent flex life&& |
| Product Description | |
|---|---|
| Supplier | Chemtura |
| Generic | PUR-Capro+MDI |
| Material Status | Commercial: Active |
| Features | Good wear resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 80 | ASTM D2240 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 33.1 | MPa | ASTM D412 |
| 100% strain | 4.83 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D412 |
| tear strength | |||
| cracking | 21 | kN/m | ASTM D470 |
| Compression deformation | |||
| 70℃，22 hr | 29 | % | ASTM D395B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| storage stability | 5.0 | min | |
| Post curing time | |||
| 115℃ | 16 | hr |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 115℃ | 0.50 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |