| About |
|---|
| Product Description | |
|---|---|
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Antifreeze,low-temperature impact resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.9 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 1.5 | g/10min | ISO1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 48 | HD | ISO 868 |
| tensile strength | 21 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 500 | % | ISO 527 |
| bending strength | 16 | MPa | ISO 178 |
| Bending modulus | 440 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | No break | ISO 180 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |