| About |
|---|
| ORIENTENE MD 12 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Africa & Middle East for injection molding. Important attributes of ORIENTENE MD 12 are: Good Processability Food Contact Acceptable Typical applications include: Food Contact Applications Adhesives/Tapes&& |
| Product Description | |
|---|---|
| Supplier | Oriental |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Food contact compliance,Good Tensile Strength |
| Availabilitys | Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ISO 1183 , ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 12 | g/10min | ASTM D1238，ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 33.0 | MPa | ASTM D638 |
| yield | 33.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 8.0 | % | ASTM D638 |
| yield | 8.0 | % | ISO 527-2/50 |
| Bending modulus | |||
| 1% secant | 1350 | MPa | ASTM D790A , ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 32 | J/m | ISO 180，ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 104 | ℃ | ASTM D648，ISO 75-2/B |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |