| About |
|---|
| Medalist MD-16120G XRD1 is a high performance thermoplastic elastomer specifically designed for healthcare and medical applications. Medalist MD-16120G XRD1 is a low hardness, low density, lubricated grade that can be sterilized and is suitable for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High liquidity,Good disinfection,Halogen free,Low Hardness,Lubricating,Good Tensile Strength,Low density,Soft,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.840 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 125℃，0.325kg | 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw OO, 1 second, injection molding | 23 | ||
| Shaw OO, 5 seconds, injection molding | 20 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 1.38 | MPa | ASTM D412 |
| 100% strain | 0.0350 | MPa | |
| 200% strain | 0.0440 | MPa | |
| 300% strain | 0.0540 | MPa | |
| Tensile strain | |||
| fracture | 1300 | % | ASTM D412 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 121 to 135 | °C | |
| Barrel middle temperature | 135 to 149 | °C | |
| Barrel front temperature | 149 to 160 | °C | |
| Nozzle temperature | 149 to 166 | °C | |
| Processing (melt) temperature | 149 to 166 | °C | |
| Mold temperature | 27 to 49 | °C | |
| Injection speed | 慢to中等 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Cushion | 3.81 to 25.4 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |